NUBRID™ SERIES

The Nubrid™ Series of nanocomposites is made with a hybrid nano-filler system, combining either nano tubes (HNT) or clay with a traditional filler system. The hybrid approach provides some of the advantages of a nanocomposite system such as light weighting, scratch resistance and stiffness, but is more cost-effective.

Properties

• High stiffness and impact
• Good dimensional stability
• Higher heat deflection temperature (HDT) than traditional TPO
• Easier processing than conventional TPO
• Range of melt flows

Injection Molding Conditions

• Molding temperature range is 380 – 450 F
• Water temperature range is 80 -130 F

Product	Flexural modulus, tangent  ksi	Notched izod impact at 23 °C  ft-lb/in	Heat deflection, 66 psi  ° F	Specific gravity  g/cc	Tensile strength, yield  psi	Melt flow 230 °C, 2.16 kg  g/10 min
Nubrid 4000 -- HNT/PP Caper Seat	240	10.4	NA	1.01	3110	8.6